Shopping Cart

Camera Module For Raspberry Pi (Sunrom Technologies)

In stock
Rs. 270.00


This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go!

The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications where size and weight are important. The sensor has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

Hardware connection: 
1 soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
 2. tear protective film on the lens
3 bare boards, pay attention to ESD damage, beware of static electricity!
1. RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade;
2. raspi-config, select the camera, start RPi firmware camera driver, and then restart
3 using the command-line program raspivid and raspistill operate camera to capture video clips or images

4 to capture video clips need to play with mplayer

How will the data through the network camera live broadcast out:
By nc command (ncat - Concatenate and redirect sockets) of the input data of the camera, directly to the output ports of the network redirection.

Note: This module is only capable of taking pictures and video, not sound.

Package Includes : 

1x Raspberry Pi Camera Module

Specification and Features :
  1. Lens: 1/4 5M
  2. Aperture: 2.9
  3. Focal Length: 3.29
  4. FOV: 72.4 degrees
  5. Fully Compatible with Both the Model A and Model B Raspberry Pi
  6. 5MP Omnivision 5647 Camera Module
  7. Still Picture Resolution: 2592 x 1944
  8. Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
  9. 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
  10. Size: 20 x 25 x 9mm
  11. Weight 5g
  12. Fully Compatible with many Raspberry Pi cases
More Information
Material Burlap
Write Your Own Review
You're reviewing:Camera Module For Raspberry Pi (Sunrom Technologies)
Your Rating